Welcome to my store!!!
220V DIY Heat Gun Electric Power tool hot air 300W temperature Shrink Plastic
Specification,
Material: Steel Plastic
Working Temp: 200 c
Rated Voltage: 220V 50-60Hz
Rated Output Power: 300W
Plug Type: EU Plug
No-Load Speed: 1200rpm
Length: 225mm
Width: 42mm
Weight: 220g
Description,
Soft clay quickly stereotyped.
Quick ON/OFF Switch.
1m length power cable.
Beautiful colors.
Note,
Do not blow the hot air gun directly at 90° to the object.
The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm.
The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.
The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits.
Never touch the hot nozzle or melted glue for your sake.
Keep it away from children.
THANK YOU…