4-1/2”x0.045”x7/8” Metal Cutting Disc
LotFancy Cutting Wheels are made from aluminum oxide abrasive, combined with 2 full sheets of fiberglass mesh and hard resin bond matrix, to ensure aggressive cutting action and durable long life wheels.
Metal Cutting Wheels have a thin 0.045-Inch cutting edge, designed for fast burr free cutting.
Our cutting discs offer a long service life, require less force to complete each cut, and maximize cutting capacity at a fraction of the cost.
Wide Application
This cut off wheels can be used to cut through
all types of ferrous metals and stainless steel
, including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces.
Specification
Grit Material: Aluminum Oxide
Diameter: 4.5-Inch (115mm)
Thickness: 0.045-Inch (1.2mm)
Arbor: 7/8-Inch (22.2mm)
Maximum speed: 13,300 RPM
Grit: 60
Quantities: 50PCS
Compatible Models for Reference
Used with 4.5-Inch Angle Grinder, such as
Bosch 1375A, GWS8-45, AG40-11PD, GWS10-45P, GWS9-45, AG40-85PD, CAG180B, GWS10-45
Makita 9557PBX, 9564PC, 9564CV, GA4534
DEWALT DCG414B, DWE402, DCG413B
PORTER-CABLE PC60TAG, PCE810, PC60TPAG, PC750AG
Black & Decker BDEG400, G950, 7750, G850
Hitachi G12SS2, G12SR4, G12SQ
Tacklife AGK31AC
Replacement DEWALT DW8062B5, Makita Mak-4129
Tips
When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work.
For best results, consider not pushing too hard on the wheel, which may cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the possibilities of slippage or loss of control of the tool, resulting in injury or damage.
Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up.
Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life.
For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.