BEWARE OF CHINESE COPYCAT PRODUCT SWAMPING EBAY, THEY ARE JUNK & NONE OF OUR PARTS WORK WITH THEM!
Start your homebuilt grinder project off with a rock solid steel backing plate!
D-shaped backing plate for flat platten assembly, this one with even deeper reach for slack belt grinding. This plate is precision cnc cut from 3/8″ hot rolled steel. Wheel mounting holes are 1/2-13 precision tapped to ensure that axles are perpendicular to the plate. The centre mounting hole is 1/2″ diameter, the slots for a flat platten mounting bracket are 1/4″ wide & 6″ apart, the u-shaped adjusting slot accepts a 3/8″ bolt or stud. The axle holes are 10.5″ center to center apart; if you mount two 2″ diameter wheels on this backing plate you can easily mount an 8″ long by 2-1/2″ wide flat platten between the wheels for a large grinding surface. The rectangular spacer plate is 1/8″ thick, this effectively makes this plate 1/2″ thick through the pivot point & therefore interchangeable with any 1/2″ thick d-plate.
We include 2 grade 8 bolts, 3,5″ long, 1/2-13 thread, with 4 nylon spacers, 2 1/2″ washers & 2 half-nyloc nuts. Also available in a different listing with tracking wheels & a platen mounting bracket. Also available in 1/2″ aluminum.
Please also have a look at
our other listings, visit our Ebay store & search OriginBladeMaker on Youtube for some other fun
stuff.