CROUSE HINDS®
ECD15 1/2″ EXPLOSION PROOF DRAIN/BREATHER
MAINLAND VALVE & FITTING, INC.
INDUSTRIAL WHOLESALE SUPPLY
MAINLAND VALVE & FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS, YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS.
Be sure to add me to your
favorites list
!
CROUSE HINDS
®
ECD15 1/2″ EXPLOSION PROOF DRAIN
Lot Description:
CROUSE HINDS
®
ECD 15  1/2″ Explosion Proof Drain
ECD15
“Universal” drains and breathers have:
•
Patented labyrinth design, suitable for use in
Class I, Division 1 & 2, Groups C,D and Class
II, Division 1 & 2, Groups F,G areas
• Capability to pass 50 cc of water per minute
and 0.2 cubic feet or air per minute at
atmospheric pressure
• ECD15 have a well inside
the inner, threaded end to provide for
accumulation of sediment without clogging
when used as a drain
BREATHER / DRAIN
Applications:
ECD drains and breathers are installed in enclosures or conduit systems to: Provide ventilation to minimize condensation Drain accumulated condensate • At least one breather should be used with each drain • A breather is installed in top of enclosure or upper section of conduit system • A “standard” drain is installed in bottom of enclosure or in lower section of conduit system • “Universal” breather or drain functions as a breather when mounted at the top of an enclosure, or as a drain when mounted in the bottom of an enclosure • “Combination” breather and drain is used in those applications where the use of a top mounted breather is not practical due to limited space; or in offshore and marine installations where moisture may enter the enclosure through the breather located on top of enclosure • Drains and breathers are installed in hubs or drilled and tapped openings
ECD15
1/2″ NPT STAINLESS STEEL
UL & CSA LISTED
SHIPPING WEIGHT: 5 OZ
(
These products are represented as NEW SURPLUS)
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US.
Be sure to add me to your
favorites list
!
Bid High
&
Bid
Often
THANK YOU, COME AGAIN
Please note:
In some cases we will use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F, 8-5 cst. We will respond to any questions you have on the following business day.
INVESTMENT RECOVERY
*SURPLUS INDUSTRIAL WHOLESALE SUPPLY*
Terms & Conditions:
Mainland Valve & Fitting, Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve & Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied.  All products represented by Mainland Valve & Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied.  All Names, Logos, Description & other related information are trademarks of their respected companies.
All information listed herein is, to the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. Please review the pictures carefully. All material noted as
new surplus
are unused and in as new condition, all material noted as
used
are used and in a usable or repairable condition. If you have any questions, contact us.
Shipping cost will be actual cost only plus a small handling fee to help cover cost associated with shipping ($2.00 min. unless special request are made). We will combine multiple auctions into one shipment; you pay only one handling fee per shipment, even on combined shipments. Questions, comments, or concerns please contact us.
Please check out our about me page which includes our full terms and conditions and full warranty information.