OUR WHEELS ARE MADE IN AMERICA: BEWARE OF IMITATORS WHO STOOP TO THE LEVEL OF INCLUDING A US FLAG IN THEIR PICTURES WHILE THEIR WHEELS ARE MADE IN EASTERN EUROPE, UNFORGIVEABLE!!!
In this set:
*
ONE
crowned tracking wheel. The tracking wheel is 3″ in diameter and 2.25″ wide. The 3 bearings are removable so that they can be replaced when they wear out. The bearings have a 1/2″ bore. This wheel is crowned, it does not have a sharp v.
WE INCLUDE A 3/8″ WIDE STANDOFF
*
TWO
idler wheels. 2″ diameter and 2.25″ wide. The 3 bearings are included and have a 1/2″ bore. WE INCLUDE 2X 3/8″ WIDE STANDOFFS.
*
ONE
crowned drive wheel. The drive wheel measures 4″ in diameter and 2.25″ in width. It has a 5/8″ bore with a 3/16″ keyway cut into it. 1/4-20 x 1/2″ set screw is included. DISHED SIDE FACE.
IF YOU NEED A DRIVE WHEEL WITH A 3/4″, 19MM, 7/8″ OR 24MM BORE PLEASE LEAVE A MESSAGE ON THE CHECKOUT PAGE & WE’LL SEND THAT OUT.
Thanks for looking!